loading
reading
writing
saving
searching
HiTorque 3990 Mini Mill MILLING MACHINE - $1,800 (Reading)
Fieldstone Road near yerger boulevard
condition:
good
make / manufacturer:
Little Machine Shop
model name / number:
HiTorque 3990 Mini Mill
size / dimensions:
23.228" x 19.685" x 36.299"
QR Code Link to This Post
*The Starter Button may need to be replaced but there is no problem with starting the mill. It just has to be started with the SPEED set at 0 and once its on, the speed can be set to the desired RPM.
Please refer to the following links from the manufacturers websites for a comprehensive description of the Milling Machine, the Tooling Package and the Tool Box:
https://littlemachineshop.com/products/hitorque-3990-mini-mill (Milling Machine)
https://littlemachineshop.com/products/mini-mill-tooling-package-r8-deluxe (Mill Tooling Package)
https://www.lowes.com/pd/Kobalt-27-Powder-Coated-4-Drawer-Rolling-Cart/3460730 (Kobalt Tool Box)
DESCRIPTION
The LittleMachineShop.com HiTorque Mini Mill is the best in its class. It has the most power, the most torque, and a larger table than other mills in its class.
This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel.
The 500-Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2500 RPM continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill machine is the quietest in its class.
The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.
The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.
This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary.
The LittleMachineShop.com exclusive version of this machine features:
500 Watt output spindle motor
Large X-Y table
R8 Spindle for wide tool availability
Solid column that does not tilt
NSK brand Japanese bearings
Gas strut provides even support through the Z-axis range
Dovetail column maintains head alignment at any height
Fine feed on Z-axis for precise control
Three radial handles for drilling
E-stop safety power switch
Adjustable Z-axis stop for repetitive drilling
Neoprene bellows protect horizontal ways
Adjustable gibs on all dovetail ways
Includes R8 to 33JT drill chuck arbor and 1/2" drill chuck
The HiTorque Mini Mill comes with the following:
Mini Mill Users Guide written by Chris Wood
2 T-slot nuts with 3/8"-16 thread
Three open end wrenches (8/10 mm, 14/17 mm, 17/19 mm)
Four hex (Allen) wrenches (3, 4, 5, and 6 mm)
One 45-52 mm spanner wrench
Spindle lock pin
Oil can (plastic)
One 1/2" drill chuck and R8/JT33 arbor